SMOK RPM 2 80W - POD MOD KIT
Uncover the SMOK RPM 2 80W Pod Mod System, featuring a whopping 2000mAh battery, 7ml e-liquid capacity and utilizes the RPM & RPM2 Coil Series for satisfying vaping. Fabricated from lasting zinc-alloy, the RPM 2 is an upgraded version of the original RPM. Introducing a new RPM 2 0.16ohm Mesh Coil, the RPM 2 Pod Mod Kit can be used either in MTL or DTL form, making it an incredibly versatile device. The SMOK RPM 2 can also determine how much vaping it can offer using a predictive remaining puff counter based on a 60W output with 0.2ohm resistance level.
SMOK RPM 2 80W POD MOD KIT FEATURES:
- Dimensions - 108.5 x 31 x 28.5mm
- Integrated 2000mAh Rechargeable Battery
- Wattage Output Range: 1-80W
- Voltage Output Range: 0.5-4.0V
- Resistance Range: 0.15-3.0ohm
- Firing Speed: 0.001s
- Zinc-Alloy Chassis Construction
- Single Firing Button
- Two Adjustment Buttons
- 1.14" OLED Display Screen
- Remaining Puff Counter (0.2ohm Resistance / 60W Output)
- 7ml RPM 2 Pod Capacity
- Side Fill System
- E-Liquid Viewing Window
- RPM 2 Coil Series
- RPM 2 Mesh Coil 0.16 ohm - rated for 25-50W
- RPM Mesh Coil 0.4 ohm - rated for 25W
- Bottom Press-Fit Coil Installation
- Magnetic Pod Connection
- Intelligent Atomizer Recognition
- 8s Cut Off Protection
- Over Heating Protection
- Low Battery Warning
- Lithium Ion Protection
- Overcharge Protection
- Over discharge Protection
- Overcurrent Protection
- Short-Circuit Protection
- Type-C USB Port
THE BOX CONTAINS:
- 1 x RPM 2 Device
- 1 x RPM 2 RPM 2 Pod
- 1x RPM 2 RPM Pod
- 1 x Type-C USB Cable
- 1 x User Manual
Note: All specifications and descriptions are based on information provided by the manufacturer. Information provided is not representative of testing and/or verification by www.smokvape.com and should be used at consumers discretion.
Please make sure to fully comprehend the care and operation of the batteries/chargers you are using and how to care for them properly.
Note: There is always an inherent risk when using any rechargeable batteries. www.smokvape.com and any of its parent and subsidiary companies cannot be held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
www.smokvape.com and any or all of www.smokvape.com parent and subsidiary companies will not be held responsible or liable for any injury, damage or defect, permanent or temporary, that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries, please exercise extreme caution as they are very sensitive to charging characteristics and may explode or burn if mishandled.
- Always charge batteries on a clean and fire-proof surface.
- Never leave charging batteries unattended.
- Do not use batteries that have any visible damages.
- Do not use any rechargeable batteries or battery chargers if it/they have been stressed through mishandling, accidental or otherwise, even if damage is/may not be visible.
- Always keep, store and transport the rechargeable batteries in a safe, non-conductive container, in a controlled environment.
- Always make sure to dispose batteries, chargers, and/ or any other electronic device in accordance with local laws and mandates.